Consumers - SB6120: Factory Reset
FAQs

Coronavirus (COVID-19) Disruption


Our Call Center is experiencing a high number of calls due to the COVID-19 situation. We are working to assist everyone who contacts us. In the meantime, please visit www.arris.com/selfhelp for most frequently asked questions about your device. We apologize for the inconvenience and will assist you soon.

ARRIS Consumer Care

Article

SB6120: Factory Reset

« Go Back

Information

 
Question

How do I reset my SB6120 to factory default?

Answer
In some cases, the SB6120 cable modem may need to be reset to its factory default state, and clear all of the previous settings.  Resetting the SB6120 to its factory default configuration will remove all stored parameters learned by the SB6120 during prior initializations. The SB6120 can be reset to the factory default configuration using the web interface

NOTE: The initalization process may take 5 to 30 minutes.


Resetting the SB6120

  1. Disconnect the coaxial cable.
     
  2. Power cycle the unit by disconnecting the power cord for 10 seconds, then reconnect the power cord.

    User-added image

     
  3. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.100.1 into the address box. The Status page will appear.

    Image

     
  4. Click the Configuration link on top. The Configuraton page will appear.
     
  5. Click the Reset All Defaults button (as shown below).

    Image

     
  6. When asked, Do you want to proceed?, click the OK button.
     
  7. Connect the coaxial cable to the modem.

    NOTE: The initialization process may take 5 to 30 minutes.

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->