The SB8200 DOCSIS 3.1 cable modem is equipped with two 1-Gigabit Ethernet (10/100/1000) ports on the back panel. Each Ethernet ports transmit data up to 1 Gigabit per second. For a typical setup with one computer, connect the Ethernet cable to the Ethernet port on the computer and to Ethernet port 1 on the back of the SB8200 cable modem for Internet access.
Connect Multiple Client Devices
The SB8200 is a cable modem and allows one client device for Internet access. To provide Internet access to multiple client devices in the home network, add a Wi-Fi router to connect to the SB8200 cable modem or replace the SB8200 with a Wi-Fi cable modem like a SBG8300.
Add Advanced Features
The SB8200 is a cable modem and does not include advanced features such as Wi-Fi, parental controls, port forwarding, and router functions. For advanced features, add a Wi-Fi router to connect to the SB8200 cable modem or replace the SB8200 with a Wi-Fi cable modem like a SBG8300.
Utilize Both Ethernet Ports
The 2nd Ethernet port can be used for Link Aggregation setup or adding additional IP address for Internet service.
- Link Aggregation Setup - Link Aggregation, combines the two wired connections between the SB8200 and Link Aggregation capable router to achieve Internet speed up to 2 Gbps. It also provides redundancy in case one of the wired connection fails. For more information on Link Aggregation setup, refer to article # 17971 - SB8200: Link Aggregation Setup.
- Add IP Address for Internet Service - The cable provider must provide the additional IP Address for Internet service to a 2nd device. If the 2nd device cannot connect to the Internet, contact the cable provider to see if they provide additional Internet IP address; not all cable providers will allow a 2nd IP address for residential services.