Consumers - SB8200: Factory Reset
FAQs

Coronavirus (COVID-19) Disruption


Our Call Center is experiencing a high number of calls due to the COVID-19 situation. We are working to assist everyone who contacts us. In the meantime, please visit www.arris.com/selfhelp for most frequently asked questions about your device. We apologize for the inconvenience and will assist you soon.

ARRIS Consumer Care

Article

SB8200: Factory Reset

« Go Back

Information

 
Question
How do I reset my SB8200 to factory default settings?
Answer
In some cases, the SB8200 may need to be reset to its factory default state.  Resetting the SB8200 can fix connectivity issues and ensure it is operating at the fastest speed available for the Internet service subscribed.  The Factory reset can be performed by pressing the reset button.  This document describes how to reset the SB8200 to factory default settings. 

NOTE: On firmware version 1.01.009.47 and later, holding the Reset button down for 10 seconds will reset the modem and revert the custom admin password back to the default password (last 8 digit of the serial number).   For assistance with Web Manager login, refer to article # 16925 – SB8200: Web Manager Access



Factory Reset With the Reset Button
  1. Carefully insert the tip of a pen or the end of an unwound paperclip into the reset button.
     
  2. Press and hold down the Reset button for 10 seconds and then release it.  The front panel LEDs will flash.

    NOTE: There may be up to one minute delay for the Power LED on the SB8200 front panel to light up after the modem starts up.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->