Consumers - SBG6580: Original Label vs Updated Label
FAQs

Coronavirus (COVID-19) Disruption


Our Call Center is experiencing a high number of calls due to the COVID-19 situation. We are working to assist everyone who contacts us. In the meantime, please visit www.arris.com/selfhelp for most frequently asked questions about your device. We apologize for the inconvenience and will assist you soon.

ARRIS Consumer Care

Article

SBG6580: Original Label vs Updated Label

« Go Back

Information

 
Question

What is the difference between the Original label versus the Updated label on the bottom of the SBG6580?

Answer

This document describes the difference between the Original label versus the Updated label on the bottom of the SBG6580.


Image  Image
 

Original LabelDescriptionRelated FAQs
SSIDDefault name of the wireless network.For assistance with wireless, refer to Answer # 20818 - SBG6580: WPA-PSK Wireless Setup (Primary Network).
WPA-PSKDefault password required to access the wireless network of the gateway.  The password consist of 20 characters of numbers and lower case letters which will be entered into the wireless client.For assistance with wireless, refer to Answer # 20818 - SBG6580: WPA-PSK Wireless Setup (Primary Network).
PASSCODEAssociated with the CD-ROM Connection Wizard.  This PASSCODE is required when running the wizard.For assistance with using the Passcode, refer to Answer # 21086 -
SBG6580: Using the Wi-Fi Assistant.
S/NGateway serial number.For assistance with the serial number, refer to Answer # 20863 -SBG6580: Locating the Serial Number.
HFC MAC IDThe service provider may require the Media Access Control (MAC) address to activate the gateway.For assistance with the MAC address, refer to Answer # 20810 -SBG6580: MAC Address Lookup.
ModelGateway model number. 
   
Updated LabelDescriptionRelated FAQs
ModelGateway model number. 
SSIDDefault name of the wireless network.For assistance with wireless, refer to Answer # 20818 - SBG6580: WPA-PSK Wireless Setup (Primary Network).
Wi-Fi SECURITY KEYDefault password required to access the wireless network of the gateway.  The password consist of 20 characters of numbers and lower case letters which will be entered into the wireless client.For assistance with wireless, refer to Answer # 20818 - SBG6580: WPA-PSK Wireless Setup (Primary Network).
CD ROM PASSCODEAssociated with the CD-ROM Connection Wizard.  This PASSCODE is required when running the wizard.For assistance with using the Passcode, refer to Answer # 21086 -
SBG6580: Using the Wi-Fi Assistant.
S/NGateway serial number.For assistance with the serial number, refer to Answer # 20863 - SBG6580: Locating the Serial Number.
HFC MAC IDThe service provider may require the Media Access Control (MAC) address to activate the gateway.For assistance with the MAC address, refer to Answer # 20810 -SBG6580 MAC Address Lookup.

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->