The SSID (Service Set Identification) is the name given to the wireless network of the SBG6580. It is used to uniquely identify the wireless network. When attempting to establish a wireless connection through the wireless settings of a client (e.g. laptop, tablet, smartphone), a list will normally appear with the SSIDs of the wireless networks in the nearby area to connect to. When there are multiple wireless networks in the nearby area (such as a wireless network of a neighbor or coffee shop), it may be difficult to know which wireless network to connect to without knowing the SSID of the SBG6580.
The default SSID of the SBG6580 is listed on a sticker on the bottom of the device. If desired, the SSID of the SBG6580 can be changed to a new SSID of choice. This document describes how to change the SSID of the SBG6580 wireless primary network.
NOTE: It is recommended to change the SSID from a computer that is connected to the SBG6580 with an Ethernet cable.
CAUTION: When changing the SSID of the wireless network, this will cause all of the wireless devices on the network to loose connection. The wireless devices will then need to be reconnected to the network.
To Change the SSID
- Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears.
NOTE: By default the LAN IP address is 192.168.0.1. If the default address has been changed, enter the custom address in the address box.
- On the Login page:
a. Enter admin in the Username field.
b. Enter motorola in the Password field.
c. Click the Login button. The Home page appears.
NOTE: On firmware version 22.214.171.124 and later, the default admin password is required to be changed. The Change User Password prompt will immediately appear after logging into the Web manager with the default admin password. For assistance with the Change User Password screen, please refer to article # 18055 - SBG6580 (v.8.9.x): Prompt to Change Default Admin Login.
- On the Home page, click on Manage Wi-Fi Network. The Wireless - Primary Network Settings page appears.
- On the Wireless - Primary Network Settings page:
a. Network Name (SSID) - Delete the current name, and enter the desired name for the wireless network.
b. Click the Apply button.
Now that the name of the wireless network has changed, the wireless devices will then need to be reconnected to the network name. In most cases, the Wi-Fi Security Key (also referred to as the wireless password) will also need to be re-entered into the wireless client. The Wi-Fi Security Key can be found on the label located at the bottom of the gateway.