Consumers - SBG6700-AC (v8.6.x): IP Address Reserve Setup
FAQs

ARRIS Consumer Care

Article

SBG6700-AC (v8.6.x): IP Address Reserve Setup

« Go Back

Information

 
Question
How do I reserve an IP address in the SBG6700-AC gateway?
Answer
In certain scenarios, it may be desired to have a client receive a particular IP address from the SBG6700-AC, and always keep that address without having to manually configure a static IP address in the client.  This can be accomplished with the Reserve New IP Address feature in the SBG6700-AC.  The SBG6700-AC can be configured to reserve a specific IP address within the DHCP range of addresses for a specific client.  When the client connects to the SBG6700-AC, it will receive the IP address automatically that it has been reserved for.

NOTE: This option serves as a great solution for devices that are configured to use the Port Forwarding or DMZ options in the SBG6700-AC.

By default, no IP addresses are reserved in the SBG6700-AC.  This document describes how to reserve and unreserve an IP address for a particular client. 

Reserving an IP Address

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page appears.

    NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.

     
  2. On the Login page:
    a.   Enter admin in the Username field.
    b.   Enter password in the Password field.
    c.   Click the Login button.  The Home page appears.

    Image

     
  3. Move the mouse-cursor over the Basic tab, and select the DHCP sub-link.  The Basic - DHCP page appears.
  4. On the Basic - DHCP page:
    a MAC address - Enter the MAC address of the desired client to reserve an IP address for.
     
    NOTE: For assistance in obtaining the MAC Address, please refer to the following:
    b.  IP Address -  Enter the desired IP address for the client.
    c.  Host Name - Enter the desired name for the client.
    d.  Click the Apply button.
  5. Verify that the entry is displayed in the Client List, as shown below.

    Image

 

Unreserving an IP Address

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page appears.

    NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.

     
  2. On the Login page:
    a.   Enter admin in the Username field.
    b.   Enter password in the Password field.
    c.   Click the Login button.  The Home page appears.

    Image

     
  3. Move the mouse-cursor over the Basic tab, and select the DHCP sub-link.  The Basic - DHCP page appears.
  4. On the Basic - DHCP page in the Client List section:
    a.  Identify the reserved entry to be removed, and click the Select bullet.
    b.  Click the Delete button.

    Image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->