Consumers - SBG6782 (v8.4.x): DMZ Host Setup
FAQs

ARRIS Consumer Care

Article

SBG6782 (v8.4.x): DMZ Host Setup

« Go Back

Information

 
Question
How do I setup a DMZ Host in the SBG6782 Cable Gateway? 
Answer
The DMZ Host feature allows the Gateway to forward all externally initiated IP traffic (TCP and UDP protocols only) to a default host on the LAN.

This document contains the following sections:
NOTE: If the DMZ Host feature has been enabled, and now it is desired to disable it, skip down to the Disabling the DMZ Host section.
 
The following are a couple scenarios in which DMZ Host is useful:
  • When the port number or protocol in an in-bound application cannot be anticipated. For example, some network games select arbitrary port numbers when a connection is opened.
  • When all unsolicited traffic needs to be forwarded to a specific LAN host.
  • When an application does not work well with port triggering.

NOTE 1: It is recommended to manually configure the TCP / IP settings on the server that will be the DMZ host.  If this is done, then it is mandatory to configure the following settings:
  • IP address
  • Subnet mask
  • Default gateway
  • At least one DNS address

If these settings are configured without the default gateway, remote access to the server will not be available, as it will only be accessible from the local network.

NOTE 2: When manually configuring the TCP / IP settings on a device, make sure that the DHCP pool in the SBG6782 doesn't include the IP address of the DMZ host.  To verify or to adjust the DHCP pool, please refer to Answer # 22425 - SBG6782 (v8.4.x): LAN Subnet Setup.


Enabling the DMZ Host

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page appears.

    NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
     
  2. On the Login page:
    a.   Enter admin in the Username field.
    b.   Enter motorola in the Password field.
     
    NOTE 1:  For units that have been leased or purchased by Shaw Communications, the username is cusadmin, and the password is the Customer S/N (Serial Number), located on a white sticker on the bottom of the unit.

    NOTE 2:  If the unit has been leased or purchased by Time Warner Cable, and the admin username and motorola password does not allow access to the GUI, please contact Time Warner Cable for assistance.

    b.   Click the Login button.  The Home page appears.

    Image

     
  3. Move the mouse-cursor over Advanced on the top menu, and select DMZ Host.  The Advanced - DMZ Host page appears.
  4. On the Advanced - DMZ Host page:
    a.   DMZ Host -  Enter the IP Address of the DMZ Host. For example: if the IP address of the server is 192.168.0.2, then enter 2.
    b.  Click the Apply button.

    Image     
     
The SBG6782 Cable Gateway is now configured to enable a specific device on the LAN to be the DMZ host.

Disabling the DMZ Host

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page appears.

    NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
     
  2. On the Login page:
    a.   Enter admin in the Username field.
    b.   Enter motorola in the Password field.
     
    NOTE 1:  For units that have been leased or purchased by Shaw Communications, the username is cusadmin, and the password is the Customer S/N (Serial Number), located on a white sticker on the bottom of the unit.

    NOTE 2:  If the unit has been leased or purchased by Time Warner Cable, and the admin username and motorola password does not allow access to the GUI, please contact Time Warner Cable for assistance.

    b.   Click the Login button.  The Home page appears.

    Image

     
  3. Move the mouse-cursor over Advanced, and select DMZ Host.  The Advanced - DMZ Host page appears.
  4. On the Advanced - DMZ Host page:
    a.   DMZ Host - Enter 0.
    b.   Click the Apply button.

    Image
     

The DMZ Host feature in the SBG6782 has now been disabled.


Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->