ARRIS Consumer Care

SBR-AC1200P: Remote Access Setup

Printable View

« Go Back

Information

Question

How do I setup remote access in my SBR-AC1200P?

Answer

By default, access to the SBR-AC1200P configuration menu is only accessible from the local network. However, the SBR-AC1200P can also be configured to be accessible from anywhere on the Internet. This document contains the following sections:

To Verify IP Address for Remote Access
To Enable Remote Access
To Establish Remote Access
To Disable Remote Access

NOTE: The ports used for local and remote access cannot be changed.

To Verify IP Address for Remote Access

NOTE: Like all devices on the Internet, the router has an IP Address on the Internet. The WAN IP Address is assigned dynamically, verify with the Service Provider for the correct IP Address.

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears.

NOTE: By default the LAN IP address is 192.168.0.1. If the default address has been changed, enter the custom address in the address box.
On the Login page, enter admin in the Username field.
Enter password in the Password field.
Click the Login button. The Home page appears.
Move the mouse-cursor over the Basic tab and select the Setup link from the drop-down submenu. The Basic - Setup page appears, locate the WAN IP Address as shown below.

NOTE: The WAN IP Address will be used to establish a remote access.

To Enable Remote Access

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears.

NOTE: By default the LAN IP address is 192.168.0.1. If the default address has been changed, enter the custom address in the address box.
On the Login page, enter admin in the Username field.
Enter password in the Password field.
Click the Login button. The Home page appears.
Move the mouse-cursor over the Advanced tab and select the Options from the drop-down submenu. The Advanced - Options page appears, check the Remote Config Management option.
Click the OK button, on the Warning pop-up window.
Click the Apply button.

NOTE 1: A restart is not necessary, as the settings will immediately take effect.

NOTE 2: A red warning will inform the user that Remote Management is turned on.

To Establish Remote Access

Locate the WAN IP Address.

NOTE: Reference the WAN IP Address from the To Verify IP Address For Remote Access section.
From a remote location, launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://Wan IP Address into the address box, press the Enter key. The Login page appears.
Enter admin in the Username field.
Enter password in the Password field.
Click the Login button. The Home page appears.

To Disable Remote Access

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears.

NOTE: By default the LAN IP address is 192.168.0.1. If the default address has been changed, enter the custom address in the address box.
On the Login page, enter admin in the Username field.
Enter password in the Password field.
Click the Login button. The Home page appears.
Move the mouse-cursor over the Advanced tab and select the Options from the drop-down submenu. The Advanced - Options page appears, uncheck the Remote Config Management option.
Click the Apply button.

NOTE: A restart is not necessary, as the settings will immediately take effect.

Answers others found helpful

SBR-AC1200P: Port Triggering Setup

SURFboard Manager (Android): Remote Management

SBR-AC1200P: DMZ Host Setup

SBR-AC1200P: VPN Passthrough Setup

SBR-AC1200P: Diagnostics Tool

Email this page

Recipient Email *Required Your Email *Required Your Name *Required

SBR-AC1200P: Remote Access Setup

Information

Feedback

Was this article helpful?

Answers others found helpful