Answer | NOTE: This article applies to the SURFboard Wi-Fi Cable Modems (G34, G36, G54, SBG10, SBG6950AC2, SBG7400AC2, SBG7580-AC, SBG7600AC2, SBG8300).
Band Steering periodically checks Wi-Fi devices connected to the 2.4 GHz or 5 GHz band and steers them to faster available 5 GHz or 6 GHz bands. The Wi-Fi clients may experience a brief interruption when they are being steered. Band Steering requires the Wi-Fi network to share the same (SSID) and Wi-Fi password across the 2.4 GHz, 5 GHz, and 6 GHz networks. This document describes how to disable and enable Band Steering using the Web Manager.
This document contains the following sections:
Enable Band Steering
- Tap the My Network icon at the bottom of the screen.
 - Tap the Network Management box.
 - Tap the Main Wi-Fi Network + button to expand the card, then swipe the Enable single SSID for 2.4G/5G bands to the right.
NOTE: Certain models broadcast unique SSIDs on each Wi-Fi radio and require enabling Single-SSID to enable Band Steering. Â
 - The changes are taking effect.Â
 - Tap the Join button to connect to the new single-SSID.
 - The Enable single SSID for 2.4G/5G bands is now enabled and the 5GHz and 2.4GHz tabs are removed. Under the Network Name (SSID) heading, the single SSID is listed.
 - Tap the Network Settings + button to expand the card, then swipe the Enable Wi-Fi Band Steering option to the right.
 - The settings are taking effect.
 - Enable Wi-Fi Band Steering is now enabled. Connect all Wi-Fi clients to the single network SSID.
Disable Band Steering
- Tap the My Network icon on the bottom of the screen.
 - Tap the Network Management box.
 - Tap the Network Setting + button to expand the card, then swipe the Enable Wi-Fi Band Steering to the left.
 - The changes are taking effect.Â
 - Tap the Join button to connect back to the Wi-Fi network.
NOTE: Wi-Fi clients in the network will lose wireless connection.
 - Enable Wi-Fi Band Steering is now disabled.
 - Tap the Main Wi-Fi Network + button to expand the card, then swipe the Enable single SSID for 2.4G/5G bands to the left.
 - The settings are taking effect.
 - Enable single SSID for 2.4/5G bands is now disabled and both 5GHz and 2.4GHz tabs are back. Connect the Wi-Fi clients to the respective SSID.
|
|
|---|
