SBG6900-AC (v1.5.x): Unsecured Wireless Setup (Primary Network)

The primary network wireless functionality of the ARRIS SBG6900-AC wireless gateway is enabled by default with WPA-PSK encryption.  Any wireless clients that associate with the primary network will be able to communicate with other wired or wireless clients on the primary network.  This document describes how to set up the Primary Network basic wireless without wireless security.

CAUTION: With this setup, the wireless functionality of the SBG6900-AC will provide no encryption for the wireless network.

1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  
   
   NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol.
    
2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
    
3. On the Login page, enter admin or a customized username in the Username field.
    
4. Enter password or a customized password in the Password field.
   
   NOTE: On later versions of the SBG6900-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18753 – SBG6900-AC: Web Manager Access.
   
   
    
5. Click the Login button.  The Home page will appear.
   
   
    
6. On the Home page, click on Manage Wi-Fi Network.  The Wireless - Primary Network Settings page will appear.
   
   
    
7. On the Wireless - Primary Network Settings page, Wireless Network - Leave at default, which is Enabled.
8. Network Name (SSID) - Enter the desired network name of choice, or leave it at the current setting.
9. Network Name (SSID) Broadcast - Leave at default, which is Enabled.
10. Wireless Security - Click the drop-down tab, and select Unencrypted.
11. The Open Security pop-up box appears.  WPS is being configured with Open Security. Do you want to continue?  Click the Yes button. 
12. Click the Apply button.
    
    NOTE: A reboot of the unit is not required for changes to take effect.
    
    

For assistance with the wireless client:

• Refer to Answer # 22245 - Windows 8: Wireless Connection.
• Refer to Answer # 20584 - Windows 7: Wireless Connection.
• Refer to Answer # 20063 - Wireless Setup on Microsoft Windows XP.
• Other 3rd party wireless utilities or devices, please refer to the manufacturer for assistance.